6" Black Single Wall Stove Pipe Kit — To The Wall — Fits Any Wood Stove with 6" Flue Collar

Complete 6" single-wall black stove pipe kit for venting a freestanding wood stove horizontally out through the wall.

Fits any wood stove with a 6" flue collar, regardless of brand. Measure your stove's flue outlet — if it's 6", this kit connects. Single-wall black pipe is a dimensional standard, not brand-specific.

This kit includes:

• Two 12"L pipe sections
• One 24"L pipe section
• One telescoping stove pipe, 14"–22"L
• One stove connector
• Two 45° elbows
• One square wall trim collar
• 36 self-tapping screws

Single-wall connector pipe requires an 18" clearance to combustibles. With approved SBI shielding, US clearances drop to 6" to side walls and 9" to the ceiling (9" to walls if shielding other than SBI's is used) — see the 6" single-wall heat shield kit.

The pipe itself must not pass through the wall — a listed wall pass-through or chimney section is required at the penetration. Single-wall pipe must not be used outdoors and is not permitted in mobile homes. Keep the total straight run under 10 ft including elbows, use no more than two 90° elbows, and support any horizontal run over 3 ft. Always confirm the connector pipe type and clearances specified in your stove's installation manual.