
Overview
🎁 INCLUDED FREE: Magnetic Stove Thermometer and 50 Fire Starters — everything you need for your first fire.
The Drolet Heritage wood stove (model DB03190) is a traditional-looking pedestal stove that comes with its blower already in the box. It heats 500 to 2,100 sq ft with a maximum heat output of 75,000 BTU/h, takes logs up to 20" and is rated for burn times up to 8 hours. It is EPA 2020 certified at 2.3 g/h emissions, with an average overall efficiency of 72% (HHV) and an optimum overall efficiency of 79%. Heavy-duty 5/16" steel top with a stainless steel heat shield over a 3/16" steel body, cast iron door frame with decorative trim, refractory brick lining and a vermiculite baffle. Pedestal with ash drawer, 100 CFM variable-speed blower included, 6" top flue outlet. Certified for mobile home and alcove installation. Made in Canada.
Who the Heritage is for
The Heritage is a primary heater for a mid-size home. It suits:
- Homes and cottages of about 500 to 2,100 sq ft, including main floors with an open layout.
- Buyers who want the blower included rather than added later; it pushes heat into adjoining rooms instead of letting it pool around the stove.
- Rooms where a classic look matters: a cast iron door with decorative upper and lower trim and a full pedestal base.
Drolet's heating area is the space the stove can keep at a minimum comfortable temperature in a power outage. Insulation, layout and climate all move it. The blower needs power; the stove itself does not, so it still heats by radiation in an outage.
Firebox and loading
The firebox has an overall volume of 2.4 cu ft (1.95 cu ft EPA loading volume) and measures about 21" wide, 11 3/4" high and 16 3/4" deep. Logs load east-west, side to side, up to 20" long; Drolet recommends 16" splits, the length used in EPA testing. The door opening is 17 1/2" x 9", with ceramic glass and an air wash that helps keep the glass clear. Overall the stove measures 26" wide, 32" deep and 32 3/4" high, and it ships at about 367 lb.
Burn time and heat output
Drolet rates the Heritage at up to 75,000 BTU/h with a dense load of dry cordwood, and at 14,200 to 44,500 BTU/h overall heat output from low to high burn under EPA test conditions. The maximum burn time is up to 8 hours; treat it as a best case. Wood species, moisture, load size, chimney draft and air setting all shorten or stretch it.
On a cold start, give the fire the full air setting (the control is under the ash shelf) and a few minutes with the door ajar before you turn it down.
Heritage vs. Escape 1800 vs. Blue Ridge 300P
The Heritage shares its core numbers with two other pedestal stoves we sell. The Drolet Escape 1800 pedestal has a more modern look and a shallower body; the Englander Blue Ridge 300P is built by the same manufacturer (SBI) in the USA. On both, the blower is an add-on.
↔ Swipe the table to see more →
| Drolet Heritage | Drolet Escape 1800 (pedestal) | Englander Blue Ridge 300P | |
|---|---|---|---|
| Heating area | 500–2,100 sq ft | 500–2,100 sq ft | 500–2,100 sq ft |
| Max heat output | 75,000 BTU/h | 75,000 BTU/h | 75,000 BTU/h |
| Firebox | 2.4 cu ft | 2.4 cu ft | 2.4 cu ft |
| Max log length | 20" | 20" | 20" |
| Max burn time | 8 h | 8 h | 8 h |
| Emissions | 2.3 g/h | 2.3 g/h | 2.3 g/h |
| Blower | Included (100 CFM) | Optional | Optional |
| Made in | Canada | Canada | USA |
| Price | $1,589 | $1,549 | $1,449 |
Add a $175 blower to either alternative and the Heritage is the better value. Compare the ship dates shown on each product page before you decide.
Blower
The Heritage includes Drolet's 100 CFM variable-speed blower, the same unit sold separately as the AC02050. It mounts on the back of the stove. For automatic on/off, the manual lists the Quick Connect Thermodisc (AC02055), which runs the blower only when the stove is hot.
Venting and installation
The Heritage has a 6" top flue outlet and uses 6" connector pipe. It must connect to a UL 103 HT (2,100°F) factory-built chimney or a code-approved masonry chimney with a flue liner, with at least 12 ft of total flue height. See our wood stove chimney and stovepipe guide, our 6" stove pipe kits, or a 6" chimney liner kit for an existing masonry chimney.
Plan for side room: in the USA the Heritage needs 22" to the side walls with either pipe type. Double-wall connector pipe cuts the rear clearance from 11" to 6"; corners stay at 12". With double-wall pipe and the certified modular wall heat shield (AC02762), the manual allows 3" to the rear and 4" to the sides. For a mobile home, Drolet requires double-wall pipe and the 5" fresh air intake kit for pedestal stoves (AC01336) with insulated intake duct.
Floor protection
Unless the stove sits on a non-combustible floor such as concrete, it needs a continuous non-combustible ember pad; no R-value is required. In the USA, the pad extends 16" in front of the door opening and 8" to each side. The 46 3/4" x 54" black steel hearth pad covers the Heritage's footprint plus those extensions; see all hearth pads.
Why buy the Drolet Heritage from StoveSource
- No Sales Tax in any state.
- Free shipping to the lower 48.
- Authorized Drolet dealer, with the full manufacturer's limited lifetime warranty.
- Price match guarantee.
- Real help with sizing, clearances and venting: email info@stovesource.com or text 1-888-866-8206.
- EPA 2020 certified with 2.3 g/h particulate emissions
- Heats 500–2,100 sq ft with up to 75,000 BTU/h output
- 100 CFM blower included for efficient heat circulation
- Up to 8-hour burn time with 20" logs
- Heavy-duty 5/16" steel top with stainless steel heat shield
- Glass airwash system for a clear view of the flames
- Non-catalytic combustion with stainless-steel secondary-air system
- Approved for mobile home and alcove installation
- Limited lifetime warranty — proudly made in Canada
Installation
Clearance to Combustibles (USA)
| Single-wall connector | Double-wall connector | |
|---|---|---|
| Rear wall | 11" | 6" |
| Side wall | 22" | 22" |
| Corner | 12" | 12" |
| Minimum ceiling height (from floor) | 84" | 84" |
Specifications Show details Hide details
Specifications
| Fuel type | Dry cordwood (16" recommended) |
|---|---|
| Heating area | 500 - 2,100 ft² |
| Overall firebox volume | 2.4 ft³ |
| EPA loading volume | 1.95 ft³ |
| Maximum burn time | 8 h |
| Maximum heat output — dry cordwood | 75,000 BTU/h (22 kW) |
| Minimum overall heat output rate | 14,200 BTU/h (4.16 kW) |
| Maximum overall heat output rate | 44,500 BTU/h (13.04 kW) |
| Average overall efficiency — HHV | 72 % |
| Average overall efficiency — LHV | 77 % |
| Optimum efficiency | 79 % |
| Optimum heat transfer efficiency | 76 % |
| Average particulate emission rate | 2.3 g/h |
| Average CO | 69 g/h |
| Size | Large |
| Alcove installation approved | Yes |
| Mobile home approved | Yes, with fresh air intake |
| Certified according to applicable standards | By an accredited laboratory (CAN/USA) |
| Overall dimension (Width) | 26" |
| Overall dimension (Height) | 32 3/4" |
| Overall dimension (Depth) | 32" |
| Premium quality blower (CFM) | 100 CFM included |
| Combustion technology | Non-catalytic |
| Stainless-steel secondary-air system | Yes |
| Flue outlet diameter | 6" |
| Distance — center of flue outlet to back of unit | 11 1/2" |
|---|---|
| Distance — center of flue outlet to side of unit | 13" |
| Recommended chimney diameter | 6" |
| Type of chimney | CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum chimney height | 12' |
| Door type | Single, glass with cast iron frame |
| Door opening size (Width) | 17 1/2" |
| Door opening size (Height) | 9" |
| Glass type | Ceramic glass |
| Glass surface (W × H) | 16" × 9 1/4" |
| Steel thickness — body | 3/16" |
| Steel thickness — top | 5/16" |
| Firebox size (Width) | 21" |
| Firebox size (Height) | 11 3/4" |
| Firebox size (Depth) | 16 3/4" |
| Log positioning | Loading over width |
| Maximum log length | 20" |
| Firebox lined with refractory bricks | Yes |
| Baffle type | High quality vermiculite |
| High-efficiency certified appliance | Yes, EPA 2020 approved |
| Emissions standard | EPA / CSA B415.1-10 |
| Safety standards | UL 1482, UL 737 / ULC S627 |
| Warranty | Limited lifetime |
| Shipping weight | 367 lb (166 kg) |
Shipping & Returns
Free freight shipping · Currently unavailable · curbside delivery.
Free shipping to the continental US.
Ships via LTL (Less Than Truckload) freight – carriers include XPO Logistics, Estes Express, ABF Freight, Old Dominion, and FedEx Freight. Transit time is typically 3–10 business days from ship date. The carrier will call to schedule a delivery appointment.
Remote addresses. Some rural or hard-to-access addresses carry a carrier freight surcharge. If yours does, we'll email you the exact amount for approval before your order is processed — or you can cancel for a full refund.
Curbside delivery only. The driver will lower your order to the curb or end of your driveway via liftgate. This does not include bringing the item inside, carrying up stairs, or crossing uneven terrain.
Have an appliance dolly and an extra person available on delivery day. Need inside or threshold delivery? Contact us before ordering.
Inspect before signing. Before signing the Bill of Lading (BOL), check for any visible packaging damage. Write "DAMAGED" or "Subject to inspection" on the BOL if anything looks off.
Contact us within 5 business days of delivery. Open and fully inspect your item within 48 hours.
Returns. Unused, uninstalled units in original packaging can be returned within 30 days. Appliance returns are subject to a $300 return freight charge plus a 15% restocking fee. Units that have been fired or installed cannot be returned. Accessories and parts carry a 15% restocking fee.
View full shipping policy · View return policy
Sold by StoveSource (authorized dealer). Ships directly from the brand's authorized distributor warehouse — see our Authorized Dealer page.
Frequently asked questions
Not sure what size you need? Use our quick sizing calculator to get a recommendation for your space: Stove Sizing Calculator
https://www.drolet.ca/file/DB03190_Heritage.pdf
The dimension drawing is also the last image in the product photo gallery on this page (click to zoom in for a closer look at the measurements), and the key dimensions are listed in the Specifications section below.
Warranty Show details Hide details
Product reviews
101 customer reviews from manufacturer — drolet.ca
No reviews at this rating in the current batch.
Reviews from drolet.ca, displayed with permission from Drolet (manufactured by Stove Builder International). StoveSource is an authorized Drolet dealer. More details →
Other accessories & add-ons
Blowers, screens, hearth pads and more for your stove.
Insulated Flex Pipe for Fresh Air Intake 4'
Insulated flex duct for the fresh air intake line.
$33.00
Ships in 1–2 days
Blower with Variable Speed Control | 100 CFM
The optional blower listed for this stove in the Heritage manual (46248_IA) parts list, item 46. Variable s...
$175.00
Ships in 1–2 days
Thermodisc Quick Connect
Pairs with the optional blower to activate it automatically when heat is detected.
$55.00
Ships in 1–2 days
Heat Operated Fan (178 CFM)
Self-powered by heat. 4-bladed propeller with 178 CFM airflow.
$129.00
Ships in 1–2 days
46 3/4" x 54" Black Steel Hearth Pad
Section 4 (Floor Protection) of the Heritage manual (46248) requires a protected area of 33 1/2" wide by 36...
$285.00
Ships in 1–2 days
46 3/4" x 54" Insulated Black Steel Hearth Pad
Section 4 (Floor Protection) of the Heritage manual (46248) requires a protected area of 33 1/2" wide by 36...
$369.00
Ships in 1–2 days
54" x 46 3/4" Tinted Tempered Glass Hearth Pad (10 mm)
Section 4 (Floor Protection) of the Heritage manual (46248) requires a protected area of 33 1/2" wide by 36...
$399.00
Ships in 1–2 days
Replacement Door Glass with Gasket (SE55103)
Genuine SBI replacement door glass for this stove. Size: 17 1/8" W x 10 3/16" H.
$178.99
Ships in 1–2 days
To-The-Ceiling Double Wall Pipe Kit 6"
Complete double-wall connector pipe kit to vent the stove straight up through the ceiling.
$219.00
Ships in 1–2 days
5"Ø Fresh Air Intake Kit for Wood Stove on Pedestal
The fresh air intake kit specified for this stove in the Heritage manual (46248_IA) parts list, item 33.
$82.00
Pre-order — ships Nov 16
Rigid Firescreen
The rigid firescreen listed for this stove in the Heritage manual (46248_IA) parts list, item 50.
$135.00
Pre-order — ships Feb 17
53" x 58 1/2" Certified Modular Wall Heat Shield System
Certified UL 1618 / ULC S632 modular wall shield that reduces the required clearance to combustibles.
$439.00
Pre-order — ships Jan 14
To-The-Wall Double Wall Pipe Kit 6"
Complete double-wall connector pipe kit to vent the stove horizontally out through an exterior wall.
$359.00
Pre-order — ships Dec 17
25' Stainless Flex Chimney Liner Kit 6" Flue
Line an existing masonry chimney so the stove can vent safely. 25 ft, 304 stainless.
$499.00
Pre-order — ships Dec 1
35' Stainless Flex Chimney Liner Kit 6" Flue
Line a taller masonry chimney. 35 ft, 304 stainless.
$579.00
Pre-order — ships Dec 1Already own one? Drolet Heritage Parts
See all 44 parts →Questions before you buy? Our stove experts are here to help.
Sizing for your space
Right BTU range for your sq ft and climate.
Clearance & install
Venting and clearance for your setup.
Lead time & shipping
Real ETAs and freight scheduling.
Text us a photo of your space or your old stove's label and we'll reply with the right options.
Prefer to talk? Call 1-888-866-8206 · 7 days a week · 7am–11pm ET



