Whitfield Pellet Stoves: Parts, Models, and What Replaces Them

Whitfield pellet stoves are no longer manufactured, and if you own an Advantage, Profile, Quest or Optima you have probably already discovered that the brand's website went away years ago. The good news is the thing most owners actually want to know: parts are still available, from the factory parts channel and from a large aftermarket. A Whitfield that runs can usually be kept running.

This is where the brand went, which models are which, and what the modern equivalent is when you decide it's time.

Where Whitfield went

Whitfield Hearth Products was an independent maker with a strong reputation for pellet appliances — auto-ignition, digital controls, efficient burn systems at a time when a lot of pellet stoves had none of that.

Lennox International had set up Lennox Hearth Products in 1994, and in 1998 it acquired Whitfield along with Superior Fireplace and Marco Manufacturing. Earth Stove and Security Chimneys followed in 1999, and Country Stoves in 2006. In September 2012, Lennox Hearth merged with FMI Products to form Innovative Hearth Products, based in Nashville. The Whitfield name was wound down over that period and hasn't been used on a new stove since.

That corporate history is worth knowing for one practical reason: Whitfield, Earth Stove, Country Stoves, Traditions and Brass Flame all ended up in the same parts catalogue. If you're chasing a component and searching the Whitfield name alone, widen the search to the Lennox hearth parts lists and you'll often find it.

The model list

Whitfield's pellet range ran across freestanding stoves and inserts under a lot of names over roughly two decades:

Serial number matters more than model name when ordering parts — the Advantage II-TC parts list, for instance, splits at a specific serial range for stoves built between roughly 2000 and 2007. Have the plate off the back before you call anyone.

Should you repair or replace?

Repair, if the firebox and heat exchanger are sound and the failure is a wear item. Augers, igniters, blowers, gaskets, control boards and glass are all obtainable and none of them are hard for a competent person to swap.

Replace when you hit one of these:

• A structural part is gone. Firebox doors, side panels and hopper assemblies on older Whitfields are increasingly marked no-longer-available, and when they are available the prices are high enough that they approach a meaningful fraction of a new stove.
• You're paying for repeated repairs. Two control boards and a combustion blower in three seasons is a signal.
• You want thermostatic control and scheduling. Whitfield was ahead of its time in 1998. It is not ahead of anything now.

The modern equivalent, by Whitfield model

Replacing an Advantage or Advantage II

The Advantage was Whitfield's mid-size workhorse and the model most owners are replacing. The ComfortBilt HP22 ($2,399) is the natural successor — ComfortBilt's best-selling stove, EPA certified, with auto-ignition, thermostat support, scheduling and a remote. It comes in black, burgundy and golden brown, with stainless trim options.

If the Advantage was doing more than it should have been, the ComfortBilt HP21 ($1,949) is the least expensive way into the line, and the HP50S ($1,899) puts the same class of heat into a slimmer European cabinet if floor space is tight.

Replacing a Profile 30 or a whole-house Whitfield

If your Whitfield was the primary heat source for the house rather than a room heater, size up. The ComfortBilt HP61 ($2,299) is the coverage leader in the ComfortBilt line at up to 3,000 sq ft, available in black or dark brown.

For the flagship build — cast construction and the largest format we carry — the ComfortBilt HP75C ($4,899) is a different tier of stove entirely.

If what you miss is the long burn

Big hoppers are the one place where loading frequency genuinely changes daily life. The Englander 25-CBPAH ($2,199) carries a 120 lb hopper and is made in the USA. The ComfortBilt HP22N ($2,599) is the HP22 with an 80 lb hopper and burns up to 32 hours between fills.

There is also a complete-install version of the Englander — the 25-CBPAH Complete Install Package ($2,863) bundles the venting you'd otherwise buy separately.

Replacing a Whitfield insert

If yours is an Advantage II-TC INS or a Profile 30 INS sitting in a masonry fireplace, the ComfortBilt HP22i ($2,799) is our pellet insert, rated at 40,000 BTU. Note it vents through a 3" flexible liner and your existing Whitfield liner almost certainly won't transfer — sizing is covered in the pellet insert guide.

Before you swap

Whitfield stoves used 3" or 4" flue outlets depending on model and vintage. Every ComfortBilt uses 3" pellet vent, so an existing 3" run in good condition may be reusable — but have it inspected and measure the equivalent vent length against the new stove's limit rather than assuming. The pellet venting guide explains how that calculation works, and the installation guide covers the rest.

Clearances and floor protection come from the new stove's manual, not from where the Whitfield sat. See the hearth pad guide for what that means in practice.

Bottom line

Keep a healthy Whitfield running — the parts are there and these were good stoves. When a structural part goes or the repairs start stacking, the upgrade is real: certified emissions and efficiency figures, thermostatic control, scheduling, and a warranty.

HP22 for an Advantage, HP61 for a whole-house Profile, HP22i for an insert, Englander 25-CBPAH if you want the hopper capacity. All ship with No Sales Tax in any state and free shipping over $250. Browse the pellet stove lineup or call 1-888-914-0022 with your model and serial number and we'll tell you what fits.

Replacing another discontinued brand? See our guides to Breckwell and Vogelzang pellet stove replacements.