{"product_id":"comfortbilt-gap2020-non-electric-pellet-stove","title":"ComfortBilt GAP2020 Non-Electric Pellet Stove","description":"\u003cp\u003e\u003cstrong\u003ePellet heat that keeps running when the power goes out: no outlet, no control board, no fans.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShipping is not included on this stove. It ships by freight direct from the manufacturer in Oregon, and the shipping charge is confirmed after you order:\u003c\/strong\u003e we email you the freight cost for your address to approve before the stove ships, and if you decline, you get a full refund. Want a number first? Email \u003ca href=\"mailto:Info@StoveSource.com\"\u003eInfo@StoveSource.com\u003c\/a\u003e with your ZIP code for a shipping estimate before you order.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eComfortBilt GAP2020\u003c\/strong\u003e is a gravity-fed pellet stove built by Independent Stove LLC in Grants Pass, Oregon, and sold through ComfortBilt. Pellets drop from an 88 lb hopper into the burner by gravity, and a fuel-feed lever sets how fast they burn, so the stove needs no electricity at all. It is EPA 2020 certified at 0.84 g\/h, listed to UL 1482 and ULC S627, and approved for mobile homes. ComfortBilt rates it to heat over 2,000 sq ft; in the manual's burn tests it put out 8,026 to 23,002 BTU\/h.\u003c\/p\u003e\u003ch3\u003eWho the GAP2020 is for\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHomes in areas with long or frequent power outages that want pellet heat which does not depend on the grid or a generator.\u003c\/li\u003e\n\u003cli\u003eOff-grid cabins, hunting camps and workshops with no reliable power.\u003c\/li\u003e\n\u003cli\u003eAnyone who wants a stove they can also cook on: the flat top is 32\" wide and sits 20\" off the floor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf you have steady power and want thermostat control, auto-ignition and a room blower, look at an electric pellet stove like the \u003ca href=\"\/products\/comfortbilt-hp22-pellet-stove\"\u003eComfortBilt HP22\u003c\/a\u003e instead. The GAP2020 trades those conveniences for independence from electricity.\u003c\/p\u003e\u003ch3\u003eHopper and burn time\u003c\/h3\u003e\u003cp\u003eThe 88 lb hopper holds two 40 lb bags. At the manual's tested burn rates (1.9 lb\/h on low, 4.8 lb\/h on high), a full hopper lasts roughly 18 to 46 hours. Use dry, 1\/4\" wood pellets only; PFI-listed pellets are recommended.\u003c\/p\u003e\u003ch3\u003eKey specs\u003c\/h3\u003e\u003ctable style=\"width:100%;max-width:520px\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectricity\u003c\/td\u003e\n\u003ctd\u003eNot required (gravity-fed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating area\u003c\/td\u003e\n\u003ctd\u003eOver 2,000 sq ft (ComfortBilt rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTested output\u003c\/td\u003e\n\u003ctd\u003e8,026–23,002 BTU\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEfficiency\u003c\/td\u003e\n\u003ctd\u003e51.4%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmissions\u003c\/td\u003e\n\u003ctd\u003e0.84 g\/h, EPA 2020 certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHopper\u003c\/td\u003e\n\u003ctd\u003e88 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlue\u003c\/td\u003e\n\u003ctd\u003e4\", top or rear (reversible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e32\" x 12\" x 38\" (20\" to cooktop)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e253 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMobile homes\u003c\/td\u003e\n\u003ctd\u003eApproved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eVenting: not a pellet-vent stove\u003c\/h3\u003e\u003cp\u003eThis is the most important install detail. The manual says \u003cstrong\u003enever use pellet vent\u003c\/strong\u003e with the GAP2020. It vents like a small wood stove:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConnect the 4\" flue with minimum 24-gauge single-wall black stove pipe, at least 3 screws per joint.\u003c\/li\u003e\n\u003cli\u003eRun the connector into a listed UL 103 HT Class A chimney (the stove label allows 5\" to 8\" chimneys with an increaser), or into a masonry chimney; add a 4\" stainless liner if draft is poor.\u003c\/li\u003e\n\u003cli\u003eThe chimney must rise at least 2 ft above any part of the roof within 10 ft.\u003c\/li\u003e\n\u003cli\u003eThe connector cannot pass through an attic, closet, floor or ceiling, and the chimney cannot serve another appliance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor a 6\" Class A run, our \u003ca href=\"\/products\/allfuel-hst-6-through-the-ceiling-class-a-chimney-kit\"\u003eAllFuel HST 6\" through-the-ceiling Class A chimney kit\u003c\/a\u003e and \u003ca href=\"\/products\/allfuel-hst-6-through-the-wall-class-a-chimney-kit\"\u003eAllFuel HST 6\" through-the-wall Class A chimney kit\u003c\/a\u003e are UL 103 HT listed. You will also need a 4\" single-wall connector and a 4\"-to-6\" increaser, which we do not stock. Call us and we will help you plan the run.\u003c\/p\u003e\u003ch3\u003eClearances and floor protection\u003c\/h3\u003e\u003cp\u003eThe manual's freestanding clearances assume the 10\" pedestal and rear heat shield accessory kit. ComfortBilt lists the stove at 38\" tall, which matches the version without the pedestal, so call us to confirm what ships before you plan a freestanding install.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRear-wall install: 6\" from the glass-door (left) side, 2\" from the hopper (right) side, 2\" behind the heat shield.\u003c\/li\u003e\n\u003cli\u003eCorner install: 6\" from the stove corner to each wall.\u003c\/li\u003e\n\u003cli\u003eEmber protection: 16\" in front (USA), 8\" each side and 4\" behind, using a non-combustible floor protector rated UL 1618 Type 1 or better. The manual sets the US hearth at 50\" wide by 32\" deep; our \u003ca href=\"\/products\/drolet-54-x-46-tinted-glass-hearth-pad-ac02758\"\u003eDrolet 54\" x 46¾\" tinted glass hearth pad\u003c\/a\u003e covers that area.\u003c\/li\u003e\n\u003cli\u003eNever install in a bedroom or room used for sleeping.\u003c\/li\u003e\n\u003cli\u003eMobile homes: outside air connection, stove bolted to the floor and grounded to the frame with #10 wire.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFull details are in the owner's manual under Documents on this page.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompare with:\u003c\/strong\u003e the \u003ca href=\"\/products\/comfortbilt-hp50s-pellet-stove\"\u003eComfortBilt HP50S\u003c\/a\u003e, \u003ca href=\"\/products\/comfortbilt-hp61-pellet-stove\"\u003eComfortBilt HP61\u003c\/a\u003e and \u003ca href=\"\/products\/comfortbilt-hp21-pellet-stove\"\u003eComfortBilt HP21\u003c\/a\u003e, electric pellet stoves with thermostat control and a room blower, or browse all \u003ca href=\"\/collections\/pellet-stoves\"\u003epellet stoves\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eWhy buy the GAP2020 from StoveSource\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Sales Tax\u003c\/strong\u003e in any state.\u003c\/li\u003e\n\u003cli\u003eAuthorized ComfortBilt dealer. The stove ships direct from the factory in Grants Pass, Oregon; freight is billed separately once you approve it.\u003c\/li\u003e\n\u003cli\u003eHelp with venting, clearances and floor protection: call \u003cstrong\u003e1-888-914-0022\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ComfortBilt","offers":[{"title":"Default Title","offer_id":67773144793340,"sku":"PS-GAP2020","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/9944\/0892\/files\/The_NEW_GAP_2020-8-removebg-preview_1.png?v=1792285555","url":"https:\/\/stovesource.com\/products\/comfortbilt-gap2020-non-electric-pellet-stove","provider":"StoveSource","version":"1.0","type":"link"}